for the oil, chemical and sewage industries
The Innovation Farm
Nr Bishop's Stortford
All enquiries to:
+44(0)1279 600 440
Order Fax Line
Fax: +44(0)1279 600 766
A standalone or fully integrated Spill Alert System can be created using the RDNET 1000 Wireless Call Points. These units can be placed at strategic locations where spills are most likely to occur such as refuelling stages or dosing plants.
Unlike a burglar alarm panic buttons or fire alarm brake glass unit – the RDNET is fully weatherproof and includes twin location LEDs that permits it to be found easily in poor visibility. The activation button is covered by a waterproof membrane which is further protected by a lift up hinged flap to prevent accidental operation. The two status LEDs also show the status of the call point – green for standby and red for in alarm.
The message broadcast by the Call Point can be used to illuminate a flashing beacon, sound a klaxon, trigger our Alertcomms messaging system and most importantly close the sites Pollution Containment Valve/s such the FlapstopperTM or DrainstopperTM.
Being both wireless and battery powered installation of the call points could not be simpler and where hazardous areas are involved the Call Points can be supplied with ATEX Zone 2 certification.
There is no practical limit to the number of call points that can be installed. Plus with planning sites can be zoned so that either a particular Pollution Containment valve is closed or multiple ones.